Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Match Seaory S28 ribbon 17031 to your badge layout, check compatible card stock and distinguish Bodno aftermarket cleaning from original supplies.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
For an existing Seaory S28, start a color-ribbon order with the exact replacement number. The Amazon listing for Seaory 17031 names S26 and S28 compatibility and describes a YMCKO ribbon with 300 prints. Treat that as the listing’s identification and yield claim, then compare it with the ribbon already specified for your printer and badge layout.
Cleaning supplies need a separate decision. The Amazon Bodno CC001 listing names the S28, but it is a Bodno aftermarket product. It is not established here as a Seaory original kit or a maker-approved equivalent. Seaory’s manual provides the maintenance instructions, while the seller describes the kit’s compatibility.
Amazon descriptions were checked on October 1, 2026. This guide follows published maker information and seller descriptions. It makes no claim about results from using either product.
Seaory’s S28 product page lists several ribbon families, including full-panel YMCKO. It does not identify 17031 in the retrieved specification table. The exact part number below comes from the Amazon listing, so keep the source distinction when ordering.
| Item | Source-backed description | Purchase check |
|---|---|---|
| Seaory 17031 | Amazon names YMCKO, 300 prints and S26/S28 compatibility | Confirm the full part number and intended badge sides |
| Bodno CC001 | Amazon names a cleaning kit for S25, S26 and S28 | Aftermarket compatibility is seller-attributed, not Seaory approval |
| Blank badge cards | Seaory specifies CR80 PVC or composite PVC, 0.3 to 1.05 mm | Match printable material, thickness and credential requirements |
| Cleaning rollers | Seaory’s manual describes regular roller replacement | Obtain the correct roller identity and contents separately |
Buy Seaory 17031 on Amazon. View Bodno CC001 on Amazon.
The ribbon and cleaning kit serve different purposes. Don’t count a cleaning kit as replacement card stock or assume that it includes a new roller. Ask for the contents needed for your maintenance task before placing the order.
The Amazon listing identifies 17031 as a 300-print YMCKO ribbon. Seaory separately lists full-panel YMCKO in 100-print and 300-print versions on its S28 page. That supports the general ribbon family, but the exact numbered replacement remains a listing-attributed identification. Match the previous order, package label and printer model together.
For a badge with a photograph and color logo, keep the existing approved ribbon arrangement unless you intend to change the artwork. Full-panel color and half-panel color are different choices in Seaory’s list. A higher advertised yield on another ribbon does not prove that it will reproduce the same design. Send your supplier the layout if the intended arrangement is unclear.
Before ordering several rolls, write down whether the reverse contains color, black text or no printing. The S28 maker page confirms dual-sided capability, but that feature alone does not define how your job consumes ribbon. The listing describes up to 300 single-sided or 150 double-sided cards. Ask how that yield applies to your particular front and reverse design rather than treating it as an unconditional finished-badge count.
Seaory lists half-panel ymcKO at 450 prints per roll and half-panel ymcKOKO at 250. Those are maker-published ribbon options, not identified purchase links in this guide. If your color artwork occupies only part of the card, ask Seaory or your supplier whether the approved layout can use the relevant half-panel option.
Seaory also lists KO at 500 prints per roll and several monochrome ribbons. Match the needed print color and coverage before changing families. A black-text visitor card and a full-color employee photo badge are different jobs, even if both use the same printer. No exact replacement number or qualifying Amazon offer for those alternatives is established here.
Keep an alternative ribbon order pending until the supplier supplies the full part reference. Searching only for “Seaory ribbon” leaves too much room for a different panel arrangement. A useful purchase request includes the S28 model, required ribbon family and complete replacement number, with the original approved design attached if you are switching types.
Seaory specifies ISO CR80 at 53.98 by 85.60 mm for the S28. Its product page lists PVC and composite PVC, with other materials subject to request and validation. A marketplace title that says “credit card size” does not establish the complete material specification or permission to use an unusual surface.
Seaory gives a 0.3 to 1.05 mm thickness range. Use the thickness of the cards actually being ordered, not an assumption based on their appearance. When replacing a successful stock order, retain the exact material and thickness on the purchasing record. If those details are missing, ask the supplier to identify them before approving a substitute.
Plain printable cards and access credentials require separate checks. Seaory lists encoding modules as optional equipment. That does not establish an encoder in your particular S28 or prove compatibility with your organization’s access system. If the existing card opens a door, give the supplier the approved credential specification as well as the printer’s card-stock limits.
No blank-card product is linked here because a specific qualifying stock offer has not been established for this order. Look for documented CR80 dimensions, an accepted material and a thickness within Seaory’s range. For a broader stock checklist, read CR80 Blank Cards: Choose Thickness, Finish and Material That Fit.
The Amazon listing names Bodno CC001 for Seaory S25, S26 and S28 printers. Its brand identity matters. Keep “Bodno” in the order description rather than calling it an original Seaory kit. A seller’s compatibility statement does not independently establish maker approval, identical contents or warranty treatment.
Before buying, ask the seller to itemize the cleaning cards, sticks and rollers, including quantities and any items sold separately. The listing describes a cleaning card, swab and cloth. It does not establish a replacement roller or exact quantities. That description does not show whether the box covers every maintenance task in the S28 manual. Compare the answer with the actual task you need to perform, then decide whether the aftermarket route fits your printer’s terms.
If your organization requires original consumables, obtain the Seaory original part reference from its supplier. The S28 manual tells owners to use original-manufacturer consumables, so an aftermarket purchase should be a deliberate choice. No exact original cleaning-kit Amazon offer is linked here, and CC001 should not be presented as proof that such a kit was found.
Section 9.1 of the S28 user manual says to replace the cleaning roller after each ribbon roll or monthly. Section 9.2 recommends cleaning the card path at ribbon replacement or at least monthly. Plan the maintenance materials with the ribbon order rather than assuming a color ribbon provides them.
Section 9.3 describes printhead cleaning at ribbon changes, poor print quality or monthly. These are Seaory’s instructions, not an independently tested maintenance interval. Follow the manual’s procedure for the specific component. A card-path cleaning card and a printhead cleaning stick have distinct jobs, so one should not be treated as an interchangeable substitute for the other.
This supply guide does not reproduce a general fault-finding sequence. If you have a printing problem, use Seaory’s model manual and support advice for that symptom. A ribbon purchase is not a diagnosis, and the existence of a seller-described cleaning kit does not establish that it will resolve an unexplained fault.
A replacement ribbon does not establish a badge-design software entitlement. Seaory’s product page distinguishes the printer driver from its iCARDE design application. The page’s iCARDE support wording is inconsistent about Windows 11, with different operating-system lists in different sections. Confirm your exact application release and computer before planning a software change.
For an existing station, preserve the known printer model, application edition and card layout in your order notes. If you are changing the computer at the same time, get a support answer for that computer rather than inferring compatibility from the ribbon listing. The supply purchase and the software support question can be recorded together without treating them as the same item.
A practical order note might read: “Seaory S28, replacement 17031 YMCKO for the attached layout, matching existing CR80 stock, cleaning materials itemized separately.” Add the required quantities after the supplier confirms how the front and reverse consume the ribbon. That gives purchasing a defined request instead of a broad instruction to buy compatible accessories.
The Amazon listing describes 17031 as 300 prints. Seaory’s page lists the 300-print full-panel YMCKO family, and its feature description states up to 300 single-sided or 150 double-sided cards. That does not establish 300 finished dual-sided badges. Keep the published count attributed to its source.
Ask the supplier how your particular reverse-side artwork affects consumption. Count the ribbon requirement for the approved layout and leave room in the order for your organization’s setup or rejected-card allowance. That allowance is a planning choice, not a maker yield specification.
The linked product is branded Bodno, and the Amazon listing states compatibility with the S28. It is treated here as aftermarket. No Seaory approval or original-manufacturer identity is established for it.
If original supplies are required, ask your Seaory supplier for the exact kit and roller references. If aftermarket supplies are acceptable, confirm CC001 contents and applicable warranty terms before ordering. The model name in the seller’s title does not answer those separate questions.
For ribbon-panel decisions, read Choosing a Card-Printer Ribbon: Model Codes, Panels and Yield and YMCKO vs YMCKOK: Color on Both Sides or a Black Reverse?.
For maintenance purchasing, read Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand. For a new station, read How to Choose Your First ID Badge Printer: A Complete Setup Checklist.