Buying CR80 blank cards: match the stock to your badge printer

Choose CR80 blank cards by printer compatibility, material, thickness and surface. Compare the identified Badgy packs before ordering stock.

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.

Choose blank cards by the requirements of the printer you already own. The familiar badge shape is only the starting point. Check the card material, thickness, surface and exact part number before deciding how many packs to order. A card sold for a different machine is not a confirmed replacement just because the photograph looks similar.

For a Badgy100 or Badgy200, two identified options are the Badgy CBGC0030W thick-card pack and the Badgy CBGC0020W thin-card pack. Badgy’s consumables page lists both as white PVC cards, with 100 cards per pack. It specifies 30 mil for CBGC0030W and 20 mil for CBGC0020W. Choose between them by the job and printer requirements, rather than by pack size alone.

Those listings are useful choices for a Badgy owner. They do not establish approved stock for every printer that accepts CR80 cards. If you own a Fargo or Zebra, use that model’s supply guide before copying a Badgy part number into an order. Keep the manufacturer guidance and the seller’s package description as separate checks.

Compare the two identified packs

The part numbers below follow the Amazon listing identities. Card thickness and the 100-card quantities follow Badgy’s consumables page. Both Amazon descriptions were checked on October 1, 2026. Check the current listing before buying, particularly when choosing another seller or package.

Card pack Maker-listed material and color Maker-listed thickness Maker-listed quantity Decision to make
Badgy CBGC0030W White PVC 0.76 mm, 30 mil 100 cards Match the thicker stock to your printer and badge job
Badgy CBGC0020W White PVC 0.50 mm, 20 mil 100 cards Confirm that thinner stock meets the intended requirement

Keep the full part number with the purchase request. The shared brand and pack quantity do not remove the thickness difference. If the existing badges use a specified card, start with that specification and ask before making a substitution.

Read the card specification before the pack description

Badgy’s Badgy200 brochure describes cards measuring 53.98 by 85.60 mm. Use the dimensions in your own printer documentation when checking a CR80 listing. Do not use the dimensions of the shipping box as the dimensions of the blank card.

The next checks are the stock and thickness. Badgy identifies its two packs as PVC, while HID’s DTC4500e product page lists PVC and composite card support for that printer family. Those statements describe different manufacturers’ requirements. They do not prove that a particular Badgy pack has been approved for a Fargo machine.

Ask for the card manufacturer’s technical description when a generic listing gives little beyond the quantity. The order should identify the actual stock, not just describe it as a plastic badge. A listing that omits a required detail is a reason to ask the seller, rather than a reason to assume the detail is unimportant.

Thick and thin Badgy cards answer different questions

CBGC0030W for the thicker Badgy stock

Badgy lists CBGC0030W at 0.76 mm, or 30 mil. Its Badgy200 brochure also identifies the supplied starter cards as 30-mil stock. The Amazon CBGC0030W pack names 100 PVC cards and identifies the same part number. This is the clearer starting point when replenishing that stated starter-card specification.

Keep the rest of the badge requirements in view. A card needs to suit the intended holder, printed layout and any rules your organization already uses. Reordering the same stock can preserve a known specification, but it does not establish a measured service life or resistance to every kind of handling.

CBGC0020W for a confirmed thinner-card requirement

Badgy lists CBGC0020W at 0.50 mm, or 20 mil. The Amazon thin-card pack names white PVC cards and identifies CBGC0020W. Choose this option when the thinner card is the stock your job requires, after checking the printer and intended use.

Do not read the word thin as a promise about printing cost, durability or suitability for a particular event. The listing identifies a different thickness. Whether that difference is useful depends on the badge you need to produce and the requirements around it. Ask the person who specified the existing cards before changing a replenishment order.

Plain cards, paper cards and access credentials are separate purchases

A white blank card is a printing surface. Before buying, decide whether you need only a visible photograph and text or whether the card must also work with an access system. For the latter, ask the system supplier to specify the credential technology and any encoding requirements. A plain-card listing does not establish either.

Badgy’s consumables page separately lists CBGCP030W paper cards and names the BLACKFLEX ribbon and a qualifying printer serial number for them. That is a different supply choice from the white PVC packs above. Do not substitute paper stock while keeping a color-printing requirement unchanged without confirming the full maker instructions.

Finish is also a specification to confirm. Ask the seller to identify the printable surface and any coating if the listing is unclear. The two linked PVC packs do not provide a basis for promising that another material or finish will produce the same result. Keep claims about scratch resistance, lifespan or special coatings out of the order unless the source actually establishes them.

Buying guide

Match the stock to the exact printer

Write down the full printer model and the existing card part number before searching for stock. Start with the maker’s accepted dimensions, materials and thickness limits. If the current cards are satisfactory, keep their specification as the baseline for a replacement order instead of choosing a different pack from its photograph.

Treat compatibility with another printer as unconfirmed until its documentation or supplier establishes the match. The Amazon Badgy packs name Badgy100 and Badgy200. A familiar size does not extend that stated compatibility to every printer. Use the Fargo DTC1250e supply guide Fargo DTC1250e Supplies: Ribbons, Cards and Cleaning Kits That Fit or the Zebra ZC300 supply guide Zebra ZC300 Supplies: Choose the Right Ribbon, Cards and Cleaning Kit when either is your actual model.

Keep ribbon and blank-card quantities separate

Count the blank cards needed for the next badge job before choosing the pack quantity. Include replacements and planned corrections in your own order calculation. There is no universal allowance that fits every organization, and an unused ribbon does not mean you still have enough cards.

Badgy lists 100 cards in each of the two PVC packs, but they are card purchases rather than the complete ribbon-and-card supply kit. Its consumables page lists CBGP0001C as a separate combination. If you also need a ribbon or cleaning supplies, use the Badgy200 supply guide Badgy200 Supplies: Color Ribbons, Blank Cards and Cleaning Kits and keep those quantities visible in the request.

Confirm what will arrive

Put the exact part number, thickness and pack quantity on the purchase request. Ask the seller to clarify any difference between the title and the detailed package description. The checked listing identity is a useful reference, but it is not a guarantee that every seller option or later package has identical contents.

Keep card stock and finished-badge requirements together in the approval notes. If the job involves holders, access readers or a specified card finish, confirm those requirements before the order. A staff member replenishing supplies later should be able to repeat the purchase from the recorded part number and specification.

Keep cards ready for the next printing day

Badgy’s user guide advises keeping cards clean and avoiding contact with the printable surface. Follow the instructions for your own printer when storing and loading stock. Keep opened packs protected instead of treating loose blank cards as ordinary stationery.

If a card feeds poorly, check the printer instructions before ordering a different thickness. A supply change can complicate diagnosis when the actual issue has not been identified. Record the part number already in use and ask for help with the specific symptom. Cleaning material is a separate purchase from printable badge stock.

FAQ

Are all CR80 blank cards suitable for my printer?

Use the exact printer requirements to decide. The badge format is not a complete specification for material, thickness or surface. Badgy names its own thick and thin PVC card packs, while other manufacturers publish their own supported stock requirements.

If a seller lists several printer brands without explaining the card specification, ask for the missing details. Keep the full model number in the question. A broad compatibility phrase is less useful than a documented match to the card your machine requires.

Should I choose 20-mil or 30-mil cards?

For the two Badgy packs, the maker lists CBGC0020W at 20 mil and CBGC0030W at 30 mil. Its Badgy200 brochure identifies the starter cards as 30 mil. Replenishing that stated specification is a different decision from deliberately changing to thinner stock.

Ask why the existing job needs a particular thickness before substituting. The sources identify the physical difference, but they do not establish a universal winner for durability or cost. Choose the stock that meets your printer and badge requirements.

Does a blank-card pack include a color ribbon?

The two linked Amazon listings identify card packs. Keep them separate from Badgy’s CBGP0001C supply kit, which the maker describes as a color ribbon with cards. Confirm the selected package rather than assume that every Badgy supply listing contains both.

Count remaining ribbon and cards separately before ordering. If both need replacing, compare the appropriate combination with separate purchases, using the exact quantities. Do not turn a ribbon’s stated print count into a claim about the cards included in a card-only pack.

Can these plain cards replace my door-access cards?

The linked descriptions identify blank PVC cards for printing. They do not establish the credential technology required by your door readers. Ask the access-system supplier to specify the card and any encoder before purchasing a replacement.

You may need the printed badge and access function to work together, but each has its own requirements. Put both in the purchase request. Use the first-printer checklist How to Choose Your First ID Badge Printer: A Complete Setup Checklist if you are selecting hardware as well as stock.