Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Match a Fargo DTC1500 supply order to the 045630 ribbon, check the badge layout and arrange compatible cards and cleaning supplies separately.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
For the linked full-color replacement, match your Fargo DTC1500 to part 045630. The Amazon listing identifies a YMCKO cartridge with up to 700 full-color prints and an AnythingID software demo card. The demo is not a confirmed permanent badge-design license, and the package does not establish an included blank-card pack or cleaning kit.
Check your printer’s full model before ordering. DTC1500 and DTC1500XE are different names, so don’t transfer compatibility from one to the other without exact confirmation. Also check the badge layout. A full-color ribbon’s published print count is not an unconditional promise of the same number of finished cards with printing on both sides.
The Amazon description below was checked on October 1, 2026. Check the current price on Amazon. The guidance follows the exact listing and HID’s own documentation, without hands-on testing or an assumed card lifespan.
The 045630 ribbon package on Amazon identifies DTC1500 compatibility in its title and features. The part-number field also returns 045630. Keep both the printer model and ribbon number on the order rather than buying from a photograph or the Fargo brand alone.
The seller describes YMCKO as yellow, magenta, cyan, black and overlay. It advertises up to 700 full-color prints per cartridge. Use the named panel arrangement when asking about your artwork, especially if the reverse includes information. Don’t interpret the cartridge as every possible ribbon arrangement for the printer.
The listing includes an AnythingID software demo card. Count that as a demo rather than a continuing design-software entitlement. If your office already uses a badge application, confirm the supply change within that existing setup. If you are starting a new station, settle the driver and design-program requirements separately before relying on the ribbon package.
The word “genuine” is the seller’s description of the ribbon. Ask the seller about the source and any applicable warranty terms if OEM origin is a purchase requirement. A maker-compatible part number and an active listing do not independently establish manufacturer-authorized seller status.
| Item | Source-supported identity | Purchase condition |
|---|---|---|
| Linked ribbon | Amazon identifies 045630 YMCKO for DTC1500, up to 700 full-color prints | Match the actual printer, region and layout |
| Software insert | Amazon identifies an AnythingID demo card | Do not count as a permanent license |
| Blank cards | HID lists CR80 and CR79 adhesive-back formats on its DTC1500 page | Confirm the exact material and thickness before buying stock |
| Cleaning kit | HID lists 086177 for DTC1500 | Order maintenance supplies separately if not already available |
HID’s DTC1500 product page describes ribbons yielding up to 700 full-color prints per roll. The linked seller gives the same upper count for this cartridge. Treat the number as a published supply specification rather than a measured result for your office’s artwork.
Count the front and reverse requirements before asking how many cartridges to buy. A card with printing on both sides involves a different job from a front-only photo badge. Tell the supplier whether the reverse needs color or black printing, and ask which ribbon arrangement matches that requirement. Don’t substitute an unrelated duplex ribbon because the description mentions Fargo.
Allow some ribbon and cards for setup and corrections. For example, an order for exactly 700 finished badges leaves no allowance if you plan around one cartridge’s upper published count. Use the actual job size and the supplier’s layout-specific advice instead of assuming every available print becomes a card ready to issue.
Keep the quantity of blank cards separate from the ribbon count. The linked package does not identify an included card pack. A box of ribbon is not enough to complete the job if the badge desk has no suitable stock. Count the remaining cards before placing a replenishment order.
Start with DTC1500 and part 045630 together on the purchase request. Read the model from the unit or your original order, then compare the listing’s model and part description. If a seller offers a substitute, ask for explicit compatibility with that exact printer before accepting it.
Treat DTC1500XE as a separate compatibility question. A similar name does not prove the linked DTC1500 ribbon fits it. Keep any region or unit-specific requirements with the order as well. If you cannot identify the printer confidently, ask the supplier for help using its serial and model information before buying a replacement.
Use the front and reverse layouts to describe the job. The linked offer is YMCKO, and the seller identifies its color and overlay panels. Ask whether the selected layout needs that arrangement or another exact compatible supply. A printer capable of printing a reverse does not establish that every ribbon produces the same finished-card count.
Confirm color or black printing on the back before comparing cartridge quantities. Keep a copy of the approved layout with the reorder details so another staff member can repeat the purchase. If the layout changes, check the ribbon requirement again rather than carrying forward an old quantity without review. Use the side-selection guide Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It? for the hardware decision.
HID’s DTC1500 page lists CR80 and CR79 adhesive-back card formats and identifies PVC and composite materials in its model comparison. Use the maker’s supported categories as the starting point. Ask the card seller to identify the exact stock and confirm suitability for your unit and printing job.
Confirm thickness and printable surface in the current DTC1500 documentation or with the supplier before placing a card order. The cited product page does not provide a complete stock-part and thickness matrix here, so don’t copy a limit from another Fargo model. Use your previous approved card order if you are repeating a job, then verify any proposed substitute separately.
Check the card’s access-system function before replacing specialized stock with ordinary white cards. HID describes smart-card and magnetic-stripe encoding as printer options. Your actual installed hardware and access system determine what additional requirements apply. A ribbon order does not establish those options or a compatible electronic credential.
Ask the access-system supplier for the accepted card technology and encoding arrangement if the badge opens a door. Keep the credential identity with the printing-stock specification. CR80 size alone is not enough to choose a replacement access card. If you use an adhesive printable face, confirm the exact supported face and underlying credential before changing either item.
HID’s cleaning-kit compatibility page identifies 086177 for DTC1500, with four printhead cleaning swabs, ten cleaning cards and three alcohol cleaning cards. HID recommends cleaning its DTC printers at each ribbon change. Follow the model’s cleaning instructions rather than improvising a procedure from the kit contents.
HID also lists 044260 cleaning rollers as a three-pack for the same model group. Rollers are separate from the full kit. Check what is already available at the badge desk before ordering, and keep printable cards separate from cleaning materials. No cleaning purchase link is included here because this article has not established an exact active New offer for that item.
Record the current ribbon part and the exact blank stock used for the approved badge job. Note the printer model alongside them. If the office changes suppliers, compare the item identities rather than treating the new seller’s general compatibility language as a complete match.
Keep the design application separate from the software insert advertised with a ribbon. HID identifies Workbench as maintenance and diagnostic software on its DTC1500 page. Workbench and the seller’s demo card do not establish the continuing design license staff need to create badges. Use the existing approved application if it still fits your setup.
For a new printer purchase, use the DTC1500 buying guide Before Buying a DTC1500: Bare Printer Costs and Required Software. The replacement-supply decision should start with the installed unit rather than a new hardware package. Don’t order another printer just because a supply listing advertises software, and don’t assume a bare-printer order solves a missing supply requirement.
The linked listing identifies 045630 for DTC1500. That is the compatibility supported here. Don’t transfer the supply to another Fargo model based on the brand or a similar cartridge photograph.
Use the separate DTC1250e supply guide Fargo DTC1250e Supplies: Ribbons, Cards and Cleaning Kits That Fit for that printer. Some cleaning materials cover multiple models in HID’s compatibility table, but shared cleaning-kit coverage does not establish shared ribbon compatibility.
The seller identifies an AnythingID software demo card. A demo is not a confirmed permanent design license. Ask about any continuing entitlement before planning a new badge station around the insert.
If staff already use a suitable design application, keep its licensing and printer support as a separate check. HID’s Workbench program is described as maintenance and diagnostic software, so it should not be counted as the program used to create the badge layout.
The maker and linked seller describe up to 700 full-color prints. That upper count is not a guarantee of 700 completed cards for every layout. Ask the supplier how your intended printing uses the ribbon, especially when information goes on the reverse.
Count setup and corrections separately from badges issued to people. Confirm that you have enough compatible blank cards as well. The linked ribbon package does not establish an included card pack.
Use the CR80 card guide CR80 Blank Cards: Choose Thickness, Finish and Material That Fit for stock selection and the cleaning-kit guide Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand for maintenance purchases. For hardware requirements, use the first-setup checklist How to Choose Your First ID Badge Printer: A Complete Setup Checklist.