Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Choose YMCKO or YMCKOK by front and reverse badge artwork, then confirm printer compatibility and the ribbon arrangement for the required sides.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
Choose YMCKO for a color badge printed on one side. Choose a compatible YMCKOK ribbon when you want color on the front and black text or a barcode on the back, using a printer configured for both sides. The final K means an additional black panel. It does not mean a second set of color panels.
If you need a color logo or photograph on both sides, confirm the supported ribbon and front-and-back settings for your exact printer. Don’t order YMCKOK simply because you have a dual-sided printer. The artwork on the reverse side is the deciding detail, followed by the maker’s compatibility instructions.
For a Zebra ZC300, the Amazon listing for 800300-350 describes a 200-print YMCKO ribbon with a Volty ID software demo card. It is an example for that printer, not a ribbon recommendation for every badge printer. Check the current price on Amazon. The listing description was checked on October 1, 2026.
Zebra’s ZC100/ZC300 Mac driver guide explains the color, black and overlay panels. Y is yellow, M is magenta and C is cyan. K identifies black, while O identifies the clear overlay. The guide distinguishes resin black from dye black and describes separate settings for printing black content.
The useful purchasing distinction is the panel sequence. YMCKO has the color panels, black and overlay. YMCKOK adds another black panel. In the same guide, Zebra lists YMCKO on the front with K on the back as the default dual-sided arrangement for YMCKOK. Check the instructions for your own brand before applying Zebra’s settings to another printer.
The O panel also needs attention. Zebra describes overlay as protection against fading and abrasion. An extra K does not establish an extra overlay for the reverse side. If you need a protected reverse-side layout, ask the supplier to confirm the complete supported panel arrangement rather than assuming every two-sided ribbon applies the same coating to both faces.
The table is a starting point for asking about supplies. The printer must support the chosen ribbon and printing arrangement. The panel name alone does not establish compatibility.
| Intended badge | Starting ribbon decision | Confirmation before ordering |
|---|---|---|
| Color photo badge with a blank back | Compatible YMCKO | Exact printer model, part number and region |
| Color front with black instructions on the back | Compatible YMCKOK | Dual-sided configuration and front-color/back-black settings |
| Color front with a color logo on the back | A supported color-on-both-sides arrangement | Ribbon consumption and finished-card yield for that mode |
| Black information with no color anywhere | Consider the maker’s monochrome option | Approved part number and any required overlay |
For a new hardware purchase, read the guide to one-sided and dual-sided printers Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It?. For replenishment, keep the working printer’s full model in the order request. You don’t need a different printer simply because two compatible ribbon types have different uses.
YMCKO is a sensible starting point when the back of your badge stays blank. For example, an employee badge may have a photograph and company logo on the front, with no reverse-side information. Confirm that your existing printer uses the specified cartridge, then replace it by part number.
The linked Amazon package identifies 800300-350 as YMCKO with 200 prints for the ZC300. Its title also names a software demo card. Treat the description as the seller’s package description. A demo card does not establish a permanent badge-design license, and the marketplace brand field does not independently establish maker origin.
Zebra’s ZC300 specification sheet lists YMCKO options with 200 and 300 cartridge images. The panel letters therefore don’t identify capacity by themselves. Keep the full cartridge number in the order rather than asking purchasing staff for a generic “YMCKO ribbon.”
A two-sided printer may also use YMCKO in a supported layout. Zebra’s driver guide includes a YMCKO-front/YMCKO-back arrangement. If you choose that mode, ask how many ribbon panel sets each finished badge uses. Don’t use a one-sided advertised count as the finished-card count for a color-on-both-sides job.
YMCKOK is the clearer starting point when the reverse side contains black information. You might put return instructions on the back of an employee badge. Show the supplier the actual artwork and confirm that the back contains no color elements before choosing the replacement.
Zebra’s driver guide identifies the usual YMCKOK arrangement as YMCKO front and K back. The additional black panel is intended for a different task from the front color panels. If someone later adds a colored logo to the reverse-side template, review the ribbon settings and supply calculation before printing the next batch.
A printer’s side configuration still applies. Buying a YMCKOK cartridge does not add a card-turning mechanism or prove that a one-sided unit supports the intended process. For a hardware order, ask for confirmation of automatic dual-sided printing. For an existing printer, check its configuration rather than relying only on the family name.
The ZC300 specification sheet lists a 200-image YMCKOK option. The checked Amazon listing for part 800300-360 was unavailable on October 1, 2026, so there is no purchase link for it here. Ask for the correct part for your unit rather than substituting a ribbon for another Zebra model because its panel letters match.
Make a short description of what prints on each side. State whether the front needs a color photo and whether the reverse needs black text or color artwork. Send the actual template if possible. A supplier can confirm a ribbon more clearly from the intended job than from a request for “double-sided color.”
Keep color on both sides separate from color on the front and black on the back in your purchase notes. If your organization has several badge templates, identify which template the order supports. An occasional visitor card with a blank back can have a different supply requirement from a staff badge with reverse-side instructions.
Start with the maker’s image or print count, then confirm how it applies to your selected layout. Zebra labels its ribbon table as cartridge image counts. A seller’s use of “prints” should not become an unconditional promise of the same number of completed two-sided badges.
For planning, separate blank cards from ribbon capacity. An illustrative batch of 150 people requires at least 150 printable cards before allowing for corrections. Whether one ribbon covers that batch depends on the exact cartridge and side arrangement. Allow extra supplies for setup and corrected records instead of ordering exactly to an unconfirmed theoretical limit.
Order by the full printer model and ribbon part number. Panel letters explain the type of printing, but they don’t establish whether a cartridge fits a particular unit. A cartridge from another printer family can have the same color sequence. Keep suffixes in your purchase request and ask the seller about region or custom coding where applicable.
Zebra’s specification sheet says the ZC300 is designed for genuine Zebra ribbons and notes regional availability differences. The linked package’s seller description names a Zebra part, but a listing title is not independent proof of origin. Confirm the supplied cartridge and its suitability for your actual unit before treating another seller’s offer as equivalent.
The supported front-and-back panel arrangement must agree with the badge template. Zebra’s driver guide distinguishes front and back options, including black extraction settings. Black extraction controls which content uses the black panel. Follow the instructions for the installed driver rather than assuming all dark artwork is handled identically.
Keep a design license and a software demo separate when comparing packages. The linked YMCKO order includes a demo card according to Amazon, not a confirmed permanent application license. A replacement-ribbon purchase should not require changing a working design program unless you have a separate reason to change it.
The additional K is a black panel, not another yellow, magenta and cyan set. Zebra’s guide identifies YMCKO on the front and K on the back as its default dual-sided arrangement. If the reverse side needs color, confirm the alternative supported mode and its supply use.
Be precise when requesting a quote. “Color on both sides” and “color front with black back” describe different artwork. Ask the supplier to confirm finished-card yield for the layout you intend to use, rather than accepting an unspecified dual-sided print count.
Compatibility comes first. A YMCKO ribbon must be approved for the exact printer and its region or coding. After confirming fit, check whether the printer and driver support your front-and-back layout with that ribbon. Matching the first five letters is not enough to settle the purchase.
If you already print successful badges with a documented ribbon, keep its part number while you investigate alternatives. Tell the supplier why you want to change and show the reverse-side design. Don’t turn a stock shortage into an unverified model substitution.
An extra black panel identifies printing capacity for black content. It does not establish an additional protective coating. Zebra describes the O overlay separately in its driver guide. Confirm which face receives overlay in your supported printing arrangement.
If badges will be carried for a long period, describe their expected use to the supplier and ask about suitable cards and protection. Don’t infer lamination or a particular service life from YMCKOK. The ribbon label alone does not establish either claim.
For ZC300 cartridges and cleaning supplies, read the model’s supply guide Zebra ZC300 Supplies: Choose the Right Ribbon, Cards and Cleaning Kit. Fargo DTC1250e owners should use their own replacement-parts guide Fargo DTC1250e Supplies: Ribbons, Cards and Cleaning Kits That Fit. For a broader explanation of ribbon selection, read the guide to model codes, panels and yield Choosing a Card-Printer Ribbon: Model Codes, Panels and Yield.