Choose a Zebra ZC100 ribbon that matches your printer

Choose Zebra ZC100 supplies by distinguishing standard and LT ribbon codes, then check blank cards and cleaning items for your exact printer.

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.

For a standard Zebra ZC100, start with the 800100-150 color ribbon. For a ZC100 LT, check 800100-150LT instead. The linked Amazon listings identify separate products, and the LT listing explicitly says its ribbon is not compatible with the named standard ZC100 models. Don’t drop the LT suffix when placing an order.

The standard 800100-150 ribbon is listed for ZC100 printers with 200 YMCKO prints. The 800100-150LT ribbon is listed for ZC100 LT printers, also with 200 YMCKO prints. Check the current price on Amazon after matching the full model number on your printer to the listing.

A matching ribbon is one part of replenishment. Keep compatible blank cards available and follow Zebra’s cleaning instructions. If another person orders supplies for your office, give them the exact ribbon code rather than a request for “Zebra color ribbon.”

Compare the two color ribbons

The compatibility and print counts below follow the exact Amazon listings. The LT listing supplies the full printer model numbers shown here. The standard listing names ZC100 compatibility without the same detailed model list, so confirm your particular configuration if its label differs.

Ribbon Listing’s printer fit Listed print count Purchase condition
800100-150 Zebra ZC100 200 YMCKO prints Match a standard ZC100 and confirm the unit’s region
800100-150LT ZC11-0000000USLT or ZC11-00000A0USLT 200 YMCKO prints Keep the LT suffix and match the complete model number

The LT listing excludes standard models ZC11-0000000US00 and ZC11-0M00000US00. A shared ZC100 family name therefore does not establish that the two ribbons are interchangeable. If you cannot read the unit’s label, resolve its identity before opening a replacement cartridge.

Standard ZC100 owners should check 800100-150

The Amazon listing identifies Zebra part 800100-150, describes a full-color YMCKO ribbon and states 200 prints. Its compatibility claim names the Zebra ZC100. Use the listing as the starting point for an ordinary color badge replacement, then compare the part number with the supplies already approved for your unit.

The title also names a Volty ID software demo card. A demo is not a permanent badge design license. If your office already uses a design program, a demo card does not require changing that program. If you are setting up a printer for the first time, settle the software entitlement separately from the ribbon purchase.

Ask the seller to confirm compatibility when the label or old cartridge has a different suffix. Give the seller a photograph of the printer label and the exact replacement number you are considering. Don’t ask only whether the ribbon fits “a Zebra printer,” because the answer needs to identify your unit.

For a new printer purchase rather than a refill, use Zebra ZC100 or an LT Kit? Read the Model and Ribbon Codes. Keep the decision about a complete kit separate from the decision about one consumable. A refill listing should not be read as a promise of blank cards, maintenance supplies or a lasting software license unless those items are expressly listed.

LT owners should keep the full 800100-150LT code

The Amazon LT listing identifies 800100-150LT as a YMCKO ribbon with 200 prints. It names the two LT model numbers in the comparison table and expressly excludes the two standard model numbers. That exclusion is more useful for purchasing than a product photo that looks similar to the cartridge already in the printer.

Write the whole ribbon number on your purchase request and keep the whole printer number beside it. If a supplier proposes 800100-150 as an alternative, ask for confirmation for your specific LT unit before accepting the substitution. The equal advertised print counts don’t settle compatibility.

Check the selected Amazon offer again when ordering. A product page can include more than one seller, and staff may select an alternative offer while arranging delivery. Keep the same exact ribbon identity throughout the order rather than approving a general color-ribbon description.

Don’t buy an LT ribbon as an experiment for a standard ZC100. The linked seller explicitly rules out that use for the named standard units. If your existing machine has an unusual configuration, obtain a clear compatibility answer instead of treating the absence of your number from a short title as permission to try it.

Plan ribbon and card quantities separately

Both linked listings advertise 200 prints, but you should plan the job around the artwork you intend to print. Ask the supplier how the stated count applies to your workflow before promising a finished badge quantity. Leave supplies for setup prints and corrected employee details rather than allocating every advertised print to the final batch.

As a planning example, an office with 150 employees should have at least 150 suitable blank cards for its finished badges, plus its chosen allowance for corrections. A ribbon’s print count does not establish how many blank cards are included. Check the card order and ribbon order as separate quantities.

Keep a note of the next known badge batch and who can approve replacement supplies. If staff only discover a shortage when a new employee arrives, even a correct ribbon order may arrive too late. A spare cartridge can be useful when your office cannot postpone badge issuance, but choose the spare by the same exact part-number check as the working cartridge.

If the badge design changes, review the supply plan before the next batch. A different layout or reverse-side requirement may change how you use the printer and supplies. For the wider printing decision, read Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It?. Don’t assume that a ribbon purchase adds a printing capability to the hardware.

Cards and cleaning need their own checks

Choose blank cards for the exact printer and intended badge use. Don’t buy a pack solely because its title says “ID cards.” Ask for the card material, size and thickness, then compare them with the documentation for your unit. The card guide at CR80 Blank Cards: Choose Thickness, Finish and Material That Fit explains the purchase questions to settle before ordering stock.

Keep ordinary visual badges separate from access credentials. If a card must unlock a door, ask the access-system supplier which credential you need before buying blanks. A printed photograph or member number does not establish that the card will work with the installed access system.

Zebra’s ZC100 and ZC300 user guide explains ribbon loading and cleaning. Zebra instructs users to remove the cleaning roller’s protective cover when installing the ribbon and to avoid forcing a cartridge into the wrong orientation. Follow the diagrams for loading rather than pressing a cartridge that will not seat.

The same guide describes an amber cleaning indicator and a cleaning procedure available through the driver. It also gives separate printhead cleaning instructions using foam-tipped swabs. Follow the relevant procedure for your unit and keep its maintenance supplies separate from printable badge stock. See Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand when comparing cleaning-kit contents and compatibility.

Buying guide

Confirm the machine before approving a refill

Start with the complete printer model number, including its ending. Record the label from the physical machine rather than copying an old online purchase title. An office can own more than one Zebra printer, so name which unit needs the refill when passing the order to purchasing.

Then approve the complete replacement ribbon code. Save a clear description beside the purchase record so the next person can repeat the order without guessing. If a seller changes the proposed part or the printer moves between offices, perform the match again before treating the old order as current approval.

Separate advertised yield from your badge plan

Use 200 listed prints as a product description, then confirm how the supplier counts prints for your intended job. Count the finished cards you need and add your own allowance for corrections. Your staff records and badge layout are the basis for the order quantity, rather than the larger number in a package title.

Check blank-card quantity independently. A ribbon order is not a card order, and a software demo is not a supply pack. Ask for an itemized contents list if the seller offers a bundle, especially when purchasing wants to replace several separate orders with one package.

Prepare maintenance before the next batch

Keep model-compatible cleaning supplies available before they are needed. Read the maker’s cleaning procedure and identify who will perform it. If several staff members share the printer, leave the instructions near the badge station so no one substitutes a household cleaner or guesses the procedure.

Confirm OEM or aftermarket identity when comparing kits. A seller’s statement of compatibility is different from a claim that Zebra made the supplies. Ask what the package contains and which instructions apply. Avoid buying a kit simply because its description includes many printer names.

FAQ

Are the standard and LT ribbons interchangeable?

The linked LT listing says its ribbon is not compatible with the named standard ZC100 models. Treat 800100-150 and 800100-150LT as separate orders. Don’t remove the suffix to make the purchasing description shorter.

If your printer number is not covered by the listing, ask the seller or Zebra to confirm the exact match. A shared advertised print count and a similar cartridge photograph are insufficient reasons to substitute one for the other.

Does the standard ribbon include badge design software?

The linked standard ribbon’s title names a Volty ID software demo card. A demo card does not establish a permanent license or all the features your office needs. Keep the software decision separate from buying a replacement ribbon.

If your office needs a new designer, check the operating system and license term before ordering. Ask about importing employee records if you plan to print a batch from a staff list. For the full first-system purchase checklist, read How to Choose Your First ID Badge Printer: A Complete Setup Checklist.

Should I replace the ribbon when print quality changes?

First check the exact ribbon identity and follow the maker’s cleaning and loading guidance. Don’t assume that buying another cartridge will resolve every printing problem. Record what changed, such as a new card pack or a replacement ribbon, so you can explain the problem accurately to support.

If problems continue after the documented checks, ask support for the next step using the printer model and observed symptoms. Avoid opening several replacement ribbons while guessing. Preserve the packaging and order details so the seller can identify the supplied part.