Refill your SMART-51 for the cards you actually print

Plan an IDP SMART-51 refill by badge artwork, ribbon code and model letter, with separate checks for cleaning cards and any lamination supplies.

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.

For an IDP SMART-51, choose the replacement ribbon from the approved front and reverse artwork. IDP identifies 659366 YMCKO for full color with resin black and overlay. It identifies 659376 YMCKOK for full color with black on the reverse. The published quantities are 250 and 200 cards per roll respectively.

Check the model letter before planning the supply order. IDP distinguishes the single-sided SMART-51S from the automatic dual-sided SMART-51D and the laminating SMART-51L. A ribbon does not add card turning or lamination. If you own an L configuration, order its compatible laminate separately rather than counting the ribbon’s overlay as the lamination supply.

The linked Amazon descriptions were checked on October 1, 2026. Check the current price on Amazon for the exact part. The guidance follows IDP’s documentation and the named listings, without hands-on testing or an assumed card lifespan.

Three checked supplies and their separate jobs

IDP’s color-ribbon chart identifies the ribbon arrangements below. The maker’s SMART-51S page also identifies the long-sleeve cleaning cards. Keep the exact part in your order so a seller can distinguish the printing supply from maintenance material.

Supply Named function Published quantity Required check
659366 YMCKO Full color with resin black and overlay IDP lists 250 cards per roll Match the card design and actual SMART-51 configuration
659376 YMCKOK Full color with resin black, overlay and black for the back IDP lists 200 cards per roll Confirm the reverse design and dual-sided printing process
659909 cleaning cards Long-sleeve cards for automatic cleaning Maker and Amazon list ten pieces Follow the installed printer’s maintenance instructions

Neither ribbon quantity establishes an included pack of blank cards. The cleaning cards are also separate from printable stock. Count the three requirements independently before scheduling a badge batch.

Start with the installed S, D or L configuration

IDP’s SMART-51S page identifies single-sided printing. Use the approved front layout to choose replenishment for that unit. If a new design adds routine reverse-side printing, settle the supported hardware and process before buying a different ribbon. A compatible ribbon family does not establish automatic turning on an S unit.

IDP’s SMART-51D page identifies automatic dual-sided printing. For a D unit, tell the supplier whether the reverse needs black text or color artwork. Keep that requirement in the reorder record rather than shortening the job description to “duplex cards.”

IDP’s SMART-51L page identifies integrated lamination alongside dual-sided printing. Ask for the exact laminate suited to the installed unit and credential design. No laminate purchase link is supplied here because an exact active New offer for that supply has not been established.

Use the SMART-51 buying guide SMART-51 Bundles: Distinguish S, D and L Before Ordering if you are selecting hardware rather than refilling an existing printer. Replenishment starts with the unit you already have and the layout already approved. Keep an optional hardware upgrade separate from an ordinary ribbon replacement.

Choose the ribbon without changing the intended layout

The 659366 Amazon listing identifies its model and part as 659366, describes 250 images, and names SMART-31 and SMART-51 series compatibility. It explicitly excludes SMART-30 and SMART-50. Keep those exclusions visible if your organization owns several different IDP printers.

The 659376 listing identifies 659376 in its model and part fields and names SMART-31 and SMART-51. Its title describes two resin black panels, overlay and a cleaning roller, with 200 cards per roll. It also excludes SOLID series printers. Shared branding is not a reason to transfer the cartridge to an unlisted family.

Use the panel descriptions to ask a precise supply question. Give the supplier the approved front and reverse artwork, then ask which exact arrangement supports it. Don’t choose 659366 solely because its published count is higher, or 659376 solely because your unit can print both sides.

The seller’s description of a “genuine” ribbon is a seller claim. If OEM origin or supplier status is part of the purchase policy, ask for the relevant confirmation. The exact part identity helps prevent a mismatch, but it does not independently prove manufacturer-authorized seller status.

Buying guide

Specify the reverse in the reorder request

Write front-only color, front color with a black reverse, or the required alternative from the approved design. IDP names different panel arrangements for the two checked ribbons. If the back needs color, ask the supplier for the matching supply and yield calculation rather than assuming the extra black panel provides color there.

Confirm the installed printing-side configuration at the same time. A D unit has the automatic dual-sided function IDP describes, while an S unit has a separate limitation to resolve. If staff are changing the layout, include the printing process in the approval. Use the side-selection guide Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It? for the underlying hardware decision.

Separate overlay from lamination

Treat the overlay identified in the color-ribbon description as part of that ribbon’s arrangement. IDP describes the SMART-51L’s integrated lamination separately on its model page. The linked color ribbons do not establish a supplied laminate roll or a complete laminating consumable package.

For an L unit, confirm the exact laminate, coverage and compatible card stock before placing the order. Keep any security design with the request so the supplier can identify the intended supply. Ask for a representative finished sample if appearance or wear is a purchase requirement. Don’t assume a fixed service life from the word “laminated.”

Match blank stock to the exact model

IDP’s SMART-51S page specifies CR80, glossy printable PVC or PVC/PET composite, 15 to 40 mil. Match size, material and thickness together when buying for that model. A white-card photograph does not establish the stock specification. Ask for the actual supplier description or repeat a previously approved item after checking that it has not changed.

Confirm any additional requirements of the D or L setup against its own documentation and installed options. Don’t copy an S-only stock check into a laminating or encoded credential order without review. Use the CR80 card guide CR80 Blank Cards: Choose Thickness, Finish and Material That Fit for the broader stock decision, and keep the actual printer with the order.

Preserve access-system compatibility

Ask the access-system supplier for the exact electronic credential requirement if your cards unlock doors. Printing-compatible dimensions and material are separate from the reader’s accepted technology. A card can have the right printable face without being the credential your site requires.

Confirm the installed encoder and encoding process before changing specialized stock. IDP describes encoding as optional on its model pages. A compatible color ribbon does not establish that your unit has the required encoder. If the current cards already work with the access system, verify any substitute with the supplier responsible for that system before ordering.

Keep cleaning cards separate from rollers

IDP’s SMART-51S page identifies 659909 as ten long-sleeve cleaning cards and 659005 as ten disposable cleaning rollers. The linked cleaning-card offer returns 659909 in its model and part fields. Keep those package identities distinct when asking what the badge desk needs for maintenance.

The 659376 Amazon title names a cleaning roller with the ribbon. That component does not establish an included pack of long-sleeve cards. Read the exact contents and follow the installed model’s cleaning instructions. No separate roller purchase link is provided here, and no universal cleaning interval is assumed from the ribbon quantity.

Plan a complete batch rather than a ribbon-only order

Count the finished badges needed now, then compare the intended layout with the selected ribbon’s published quantity. For example, a job for 300 badges needs a supply plan beyond one roll advertised for 200 cards. Leave an allowance for setup and corrections instead of planning to use every advertised print for an issued badge.

Check the remaining blank stock and maintenance supplies separately. A fresh ribbon does not help if staff have no suitable cards or lack the materials needed for the maker’s cleaning procedure. If the printer laminates, count the corresponding laminate as another required supply.

Keep the complete reorder details at the badge station. Record the printer model letter, the ribbon part and the approved stock. For an L unit, include the exact laminate identity. A later operator should be able to repeat the compatible purchase without inferring it from a generic family name.

If an existing software subscription has expired, handle that as a separate issuance problem. A ribbon replacement does not establish a design-software entitlement. Check the application your office uses and its permitted installation rather than expecting a consumable order to restore the complete badge workflow.

FAQ

Can the same ribbon be listed for SMART-31 and SMART-51?

Yes. The two linked ribbon listings expressly name both families, and IDP’s color chart covers their named ribbon arrangements. Use the exact part number and your actual model to keep the supported supply identity clear.

Shared ribbon coverage does not mean the printers have identical card limits or installed functions. Use the SMART-31 supply guide SMART-31 Supplies: Match 659366 and 659376 to the Job for that model and this page for SMART-51 configuration questions.

Does the O in the ribbon description mean I have laminate?

IDP describes overlay within the color-ribbon arrangement. It describes integrated lamination separately for SMART-51L. The linked ribbon package does not establish an included laminate supply or a laminating function in an S or D printer.

For an L configuration, ask for the correct laminate for your installed unit and credential design. Keep that exact supply in the reorder record alongside the printing ribbon rather than treating the two items as interchangeable.

Will 659376 produce color on both sides?

IDP describes 659376 as full color with black for the back. That description establishes the stated panel arrangement, not an unconditional claim of color on both sides. Confirm the supply needed for your actual reverse artwork with the supplier.

Keep the ribbon count tied to that artwork and the installed printer configuration. A published 200-card count should not be transferred to a different arrangement without confirmation. Allow additional supplies for setup and corrections as well as the badges you need to issue.

Use the cleaning-kit guide Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand for maintenance purchases and the first-setup checklist How to Choose Your First ID Badge Printer: A Complete Setup Checklist if the complete station needs review. Keep hardware configuration with the SMART-51 buying guide SMART-51 Bundles: Distinguish S, D and L Before Ordering.