Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Match Pronto100 supplies to the full MD100YMCKO regional reference and check E9100 cleaning card length and the identity of aftermarket options.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
For a Magicard Pronto100, start with the MD100YMCKO color-ribbon family and confirm the full regional reference for your unit. For cleaning, Magicard identifies E9100 with 250 mm cleaning cards. The older Magicard Pronto uses different cleaning cards, so keep “Pronto100” in every replacement order.
The Amazon MD100YMCKO bundle identifies a Pronto100 ribbon with CardPresso software and a stated capacity of 100 full-color prints. Its description explicitly excludes the older Pronto. The listing does not identify a region suffix or a lasting software license, so ask the seller about both before ordering for your unit.
For an aftermarket cleaning option, the Specialist ID Pronto100 kit states 250 mm cards, with ten cleaning cards and one printhead pen. It is a Specialist ID package, not a confirmed Magicard-made E9100 kit. Check the current price on Amazon for either linked purchase. Listing descriptions were checked on October 1, 2026.
The maker references below follow Magicard’s consumable pages and cleaning guidance. The two Amazon packages have their own seller descriptions. A seller’s use of a maker reference does not establish maker origin or approval.
| Supply | Source and stated identity | Purchase check |
|---|---|---|
| MD100YMCKO/3 color film | Magicard identifies Region 3, five panels and capacity 100 for Pronto100 | Confirm the correct region for your unit |
| MD100YMCKO with CardPresso | Amazon describes a Pronto100 ribbon bundle with 100 full-color prints | Region suffix, software edition and license term unconfirmed |
| E9100 maker cleaning kit | Magicard lists ten cleaning cards and one printhead pen | Magicard’s cleaning guide specifies 250 mm cards |
| Specialist ID kit sold under an E9100 title | Amazon identifies Specialist ID, part SPID-8500, ten cards and one pen | Aftermarket, with seller-stated Pronto100 fit and 250 mm length |
| M9006-793 blank stock | Magicard lists 500 CR80 plain white PVC cards at 760 micrometres | Match the intended plain badge stock and actual order quantity |
Keep ribbon, blank cards and cleaning supplies as separate items. A 100-print ribbon description doesn’t mean 100 blank cards are included. Cleaning cards are maintenance supplies and should not be counted as printable badges.
Magicard’s MD100YMCKO/3 page names the Pronto100 and identifies Region 3, five panels and capacity 100. The suffix is part of the maker’s order reference. Keep it when asking about compatibility rather than reducing the order to “Magicard color ribbon.”
The Amazon bundle names MD100YMCKO without a region suffix. Its model field agrees with that base reference, and its description names Pronto100 compatibility. The unsuffixed listing does not establish that the supplied cartridge is MD100YMCKO/3. Ask the seller to identify the full reference on the box and confirm it against your printer.
For a routine replacement, use the full number from a cartridge that your supplier has already confirmed for the unit. If the cartridge label is unclear, provide the printer’s model and unit details when requesting help. Don’t infer the right region from the country where you currently use the printer.
The distinction from the older Pronto is explicit in the Amazon description. A search for “Pronto ribbon” can omit the generation you own. Make the purchase request say Pronto100 and retain the exact replacement reference so another staff member doesn’t order for the older model later.
Amazon names CardPresso software in the ribbon bundle and describes badge-design and database functions. Those are seller statements about the package. The listing does not identify the software edition or license duration, so it doesn’t establish a particular lasting entitlement.
If you only need a replacement ribbon, confirm the ribbon identity first and keep using your existing design application unless you have a reason to change it. Extra software in a listing is not a reason to replace a working badge template. Ask what activation material is supplied if you intend to use the bundled program.
For a new operator, request the exact edition and operating-system requirements before relying on the bundle. Also ask whether the functions you need belong to the supplied edition. A general description of database connectivity doesn’t settle how your staff will import employee records or link photographs.
The purchase is described as a ribbon-and-software bundle, not a complete printer system. No blank-card pack or cleaning kit is confirmed by the checked listing. Add the supplies needed for your next batch instead of assuming the ribbon order replenishes everything at the badge desk.
Magicard’s E9100 consumable page identifies ten cleaning cards and one printhead cleaning pen for the Pronto100. Its cleaning-card guide specifies 250 mm cards for that kit. Use the model and length together when checking another package.
The same guide assigns 230 mm cards in CK1 to the older Pronto. For several other models, including the Magicard 300 and 600, Magicard lists 400 mm cards in 3633-0053. The guide says the length is needed to clean the appropriate parts and trigger completion. Similar kit contents don’t make those lengths interchangeable.
The linked Specialist ID package states Pronto100 compatibility and 250 mm cards. Its title uses E9100, but its returned part identity is SPID-8500 and its brand is Specialist ID. Describe it in purchase records as the Specialist ID aftermarket option, not as a Magicard OEM order.
The seller lists ten cleaning cards and a pen, which matches the stated item count of Magicard’s E9100 kit. Matching the count and length does not prove Magicard approval. If your organization requires maker consumables, ask for an identified Magicard-made E9100 package rather than treating the aftermarket offer as equivalent by origin.
Follow Magicard’s procedure and cleaning prompts for the actual printer. Don’t apply another seller’s generic cleaning interval as if it came from Magicard. For broader kit comparisons, use the cleaning-supply guide Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand, keeping the Pronto100 length requirement in your order notes.
Magicard’s M9006-793 card page identifies 500 CR80 plain white PVC cards at 760 micrometres and includes Pronto100 in its compatibility list. It is a maker-listed option for plain stock. The specific dimensions and material are more useful than a seller calling an unspecified plastic card “ID card size.”
Keep the actual pack quantity in the purchase request. A maker’s box description does not establish the contents of an unrelated marketplace package. If you choose a different card product, ask for confirmation of its suitability instead of assigning it the M9006-793 identity because it has a similar appearance.
Decide whether you need plain visual badges or a separate access credential. The M9006-793 page describes plain white PVC. It does not establish a chip or magnetic stripe. If employees need cards for an existing door system, confirm the accepted credential with the system supplier before replacing the stock with plain cards.
A ribbon order and a card order also have different quantities to track. Count the blank cards remaining before approving another ribbon. For the general stock decision, use the CR80 card guide CR80 Blank Cards: Choose Thickness, Finish and Material That Fit. Keep any specialized card requirement separate from the ordinary plain-card purchase.
Write Pronto100 and the full ribbon reference in the purchase request. The maker’s /3 reference and the unsuffixed Amazon description are not identical descriptions. Ask for the supplied cartridge’s full label and compatibility confirmation before choosing the offer for your unit.
Keep the replacement identity accessible to whoever orders next. A short note with the approved reference and the supplier’s confirmation is easier to repeat than a search term. Recheck the package whenever you change sellers, since a familiar title doesn’t establish the same region or contents in another offer.
Use the stated 100-print capacity as a planning input, not a guarantee of 100 accepted finished badges. Setup and corrected records can use supplies. If an illustrative batch needs exactly 100 approved badges, leave room for those extra prints rather than relying on the theoretical ribbon count without a spare.
Count printable cards separately from cleaning cards. The linked ribbon package doesn’t confirm a blank-card pack, and the cleaning kit’s ten cards are maintenance items. Add compatible blank stock based on the batch size and the cards already available. Don’t use the number of pieces in a maintenance kit as part of the badge quantity.
Use 250 mm and Pronto100 together when checking a cleaning offer. Magicard’s guide distinguishes the older Pronto and the longer cards used by other models. A marketplace title listing many printers should not override the maker’s model-specific cleaning guidance.
Decide whether the purchase must be Magicard-made or aftermarket. The linked Specialist ID kit is an aftermarket package with seller-stated specifications. Its use of E9100 in the title doesn’t establish maker approval. Keep the brand in the order so a later reorder doesn’t silently change your organization’s consumable policy.
Ask for the CardPresso edition and license term if the bundled application affects your decision. The listing’s design-function claims don’t identify the exact entitlement. Confirm the supplied activation material and compatibility with the computer where staff will design badges.
For replenishment, prioritize the correct ribbon for the existing workflow. A software bundle has limited purchasing value if your organization already has a suitable application. If you want to change programs, settle the template and data requirements as a separate decision before the next badge batch.
Magicard lists E9100 with 250 mm cards for Pronto100 and CK1 with 230 mm cards for the older Pronto. Use the reference for the generation you own. The shared Pronto name doesn’t establish that the shorter kit is appropriate.
Check both the title and the package description when ordering. If a seller leaves out the generation or card length, ask for the missing information. Don’t approve the kit solely because it contains cleaning cards and a pen.
Magicard’s guide assigns 3633-0053 and its 400 mm cards to a different list of printers. A seller’s broad compatibility claim is not enough to extend that maker guidance to the Pronto100. Start with the Pronto100’s E9100 requirement.
If your office owns several Magicard printers, keep the kits labeled by model. Similar-looking maintenance boxes can make reordering confusing. Record the card length with each printer’s approved reference rather than keeping one generic “Magicard cleaning kit” entry.
The checked listing names CardPresso and describes software functions, but it doesn’t establish a permanent license or exact edition. Ask the seller what entitlement you receive before counting the software as part of a new setup.
For an existing setup, the ribbon may be the only item you need from the bundle. Confirm its region and model fit independently of the software. A software inclusion claim doesn’t resolve cartridge compatibility.
For hardware decisions, read the Pronto100 purchase checklist Pronto100 Purchase Checklist: Printer, Software and First Supplies. For another Magicard model’s replenishment needs, use the Magicard 300 supply guide Magicard 300 Supplies: MC Film Codes and the Correct Cleaning Cards rather than transferring its ribbon or cleaning references to the Pronto100.