Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Match Magicard 300 ribbons by the full MC300YMCKO/2 code and check cleaning card length and aftermarket identity before placing a supply order.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
For a Magicard 300 that uses MC300YMCKO/2, the linked replacement is a two-pack of that exact color ribbon. The Amazon listing describes 300 prints per roll and up to 600 single-sided prints for the pack. Match the full code on your existing ribbon before ordering, including the suffix after the slash.
Cleaning supplies need a separate check. Magicard specifies kit 3633-0053 for the 300, with 400 mm cleaning cards. The linked Bodno kit uses that part number in its description, but it is a third-party product. Ask the seller to confirm the card length before you buy it. Do not use its broad printer compatibility list to choose cleaning supplies for a Pronto100.
This guide is for owners replenishing an existing printer. If you are choosing the printer itself, read Magicard 300 Buying Guide: Check Duplex, Software and Ribbon Region. For each linked product, check the current price on Amazon. Listing descriptions were checked on October 1, 2026.
Keep the ribbon purchase separate from blank cards and maintenance supplies. A ribbon pack does not provide everything you need to print another batch of badges.
| Purchase | Description from the named source | Check before ordering |
|---|---|---|
| MC300YMCKO/2 two-pack | Amazon lists two color ribbons, 300 prints per roll, and a software demo card | Match the complete existing code and intended badge layout |
| Bodno 3633-0053 cleaning kit | Amazon lists 10 alcohol cleaning cards and one printhead cleaning pen | Confirm 400 mm card length for the 300 and recognize the third-party brand |
| Blank cards | Magicard lists several card materials on its 300 page | Match card material to the appropriate film family |
The first two rows have purchase links below. Blank cards remain a separate selection because the correct material depends on the badge you already issue. For help with that purchase, read CR80 Blank Cards: Choose Thickness, Finish and Material That Fit.
The MC300YMCKO/2 two-pack is described on Amazon as two Magicard 300 color ribbons sold by Bodno. Its title includes a software demo card. Count that as a demo, rather than a lasting badge-design software license.
Magicard’s MC300YMCKO/2 page identifies this film as five panels with a capacity of 300 and names the Magicard 300 among compatible printers. That supports the film identity. The two-roll package and its demo card come from the Amazon listing, rather than from the maker’s single-film description.
Choose the pack when its complete code matches the film specified for your existing printer and artwork. Send the seller a photograph of the old label if the suffix is unclear. A title that says only “Magicard color ribbon” leaves too much unspecified for a replacement order.
The pack’s stated 600 single-sided prints is a supply quantity, not a guarantee of 600 finished employee badges. Corrections consume supplies too. If your cards have printing on both sides, get the ribbon requirement for that actual layout before deciding how many packs to order.
A larger pack can make sense when you will use both rolls. Keep an unopened spare available for the next batch, following the maker’s storage instructions. Do not buy extra rolls merely because the listing describes more prints. Match the order to expected replacements and the amount of stock you can store correctly.
Magicard’s 300 product page lists MC250YMCKOK/3 at 250 capacity and MC600KO/3 at 600 capacity, alongside its YMCKO choices. Those are different film descriptions, with different panel arrangements. They are not alternate names for the linked MC300YMCKO/2 pack.
Use the exact code already approved for your design, or ask the supplier to identify a replacement for a changed layout. In particular, describe the reverse side before asking for a duplex ribbon. Color on both sides and a black reverse are different purchasing requirements. For the broader panel decision, read YMCKO vs YMCKOK: Color on Both Sides or a Black Reverse?.
The maker page currently displays /3 options, while the linked Amazon pack identifies /2. Preserve that distinction in the purchase request. Do not remove the suffix when comparing listings or assume that any MC300YMCKO roll will work in every printer sold under the 300 name.
These additional film codes are here to explain why the existing label is useful. There is no purchase link for them in this guide. If you need one, ask for the full replacement reference appropriate to your printer before searching for a seller.
Magicard’s cleaning-card guide specifies 3633-0053 with 400 mm cards for the 300. The maker describes 10 roller cleaning cards and one printhead cleaning pen. Use that specification when asking a supplier to confirm a replacement kit.
The Bodno 3633-0053 kit lists 10 alcohol cleaning cards and one printhead cleaning pen. Its branding is Bodno. Treat the description as a third-party compatibility claim, and confirm the cleaning-card length because the listing does not state it.
The same listing includes Pronto100 in its compatibility list. Magicard specifies a different kit, E9100 with 250 mm cards, for that model. The maker explains that length affects whether the card cleans the required parts and triggers completion. Do not share this kit across printers on the strength of the seller’s title alone.
Keep cleaning materials with the printer and follow its cleaning instructions. A printhead pen and a roller cleaning card have different uses. Having both in a kit does not mean that either can replace the other, or that an ordinary blank badge can substitute for a cleaning card.
For a broader comparison of maintenance supplies, read Card-Printer Cleaning Kits: Match the Card Length, Rollers and Brand. If your organization requires maker-branded supplies, request the Magicard kit through a supplier rather than describing this Bodno offer as an original Magicard kit.
Make the complete part number the first item on the purchase request. Include the characters after the slash and the package quantity. Purchasing staff can then compare the listing with a defined requirement, rather than trying to infer compatibility from a printer photograph.
Keep the printer model and old ribbon label together in your supply record. A note that says “color ribbon” is not enough when several Magicard printers share a room. After any supplier-approved change, update the record so that the next order does not revert to an older reference.
Approve the front and reverse artwork before calculating the replenishment order. If the reverse contains only instructions, tell the supplier that. If it contains another color image, describe that requirement explicitly. The word “duplex” alone describes sides, without explaining what must be printed on them.
Ask for the expected ribbon use for that layout and keep the answer with the design file. The linked pack’s single-sided print count should remain labeled as such. Allow supplies for corrections separately, without presenting an invented fixed waste percentage as a printer specification.
Choose the card material supported by the selected film. Magicard’s 300 page separates its MC films from ME films for plant-based cards. Its plant-based E0001 card description specifically requires ME dye film. A change in card material therefore needs a new compatibility decision before purchasing.
Keep blank cards as a separate order line. The linked ribbon pack does not establish an included blank-card quantity. Count your existing clean stock before ordering replacements, and check the exact card pack’s description rather than treating a ribbon’s print capacity as the number of cards supplied.
Check cleaning-card length and kit branding independently. A matching number in a third-party title helps identify the intended use, but it does not establish every physical detail or maker approval. Ask for the missing length before accepting the order.
Record which printer receives the kit on the storage box or stock record. This is particularly useful when a Pronto100 and a 300 are used by the same staff. Keep their supplies distinct even if one seller lists both printers under a single cleaning product.
It is a stated ribbon capacity, not a promised count of approved badges. The Amazon two-pack description specifically says up to 600 single-sided prints. Your finished-card count depends on what you print and how many cards need corrections.
For a batch with reverse-side printing, ask the supplier to confirm consumption for the chosen film and artwork. Keep blank-card quantities separate from ribbon capacity so that you do not have sufficient ribbon but too few cards on printing day.
Do not select it by the Magicard brand alone. The linked pack is described for the 300, and the maker’s MC300YMCKO/2 page names the compatible printers. That is the scope of this recommendation.
If the printer is a 600, use its own consumables reference and check the exact replacement listing. Read Choosing a Magicard 600 Bundle Without Assuming 300-Series Parts for that printer’s purchase and configuration questions. A similar capacity or panel abbreviation does not prove cross-model compatibility.
The Amazon title describes a software demo card. That wording does not establish a permanent license, an upgrade to your current edition or permission for another workstation. Buy the ribbon for its stated printing use.
If you also need design software, ask the seller for the edition and license term as a separate requirement. Keep using an existing supported license where appropriate, and avoid counting the demo as part of a complete new badge station.
A cleaning requirement and an empty ribbon are separate conditions. Follow the printer’s maintenance instructions and check the remaining supplies before ordering. Do not assume that a new ribbon alone resolves a feed or print-quality problem.
If a problem remains after the prescribed maintenance, use Magicard support for the exact model and symptom. Describe what happened and which supplies are installed. Buy replacements when the part or remaining quantity calls for them, rather than replacing several unrelated items without a diagnosis.