Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Check an IDP SMART-31S kit for single-sided badges by confirming PC software support, license terms, starter cards, ribbon and cleaning contents.
This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.
Choose the linked IDP SMART-31S kit when you need single-sided badges and can use its PC-only Smart ID software. The Amazon listing identifies a 250-print YMCKO ribbon and 100 PVC cards, so the starter card pack is smaller than the advertised ribbon capacity. Confirm the software license term and the unclear cleaning-item description before ordering.
The SMART-31S kit on Amazon is explicitly a simplex package. Simplex means printing on one side. Don’t buy this kit for automatic front-and-back printing on the assumption that a general SMART-31 family description includes that capability. Check the current price on Amazon after confirming the package fits your job.
For a badge desk starting from scratch, the kit has a useful list of initial supplies. It still needs a computer, an agreed way to prepare employee photographs and enough cards for your first batch. Choose the setup around those requirements rather than treating an included designer as proof that every office workflow is covered.
IDP’s SMART-31S page distinguishes the single-sided SMART-31S from the SMART-31D, which provides automatic duplex printing. The linked Amazon package names the SMART-31S and calls it single-sided in its features. Keep the S suffix on the order.
A front-only employee badge can fit a single-sided purchase. If you need instructions or contact details on the reverse, decide how staff will print them before selecting hardware. Don’t count manual reinsertion as an established feature of the linked kit without confirming the supported process with the supplier.
If automatic reverse-side printing is required, ask for a separately identified SMART-31D configuration and itemized package. A title that says SMART-31 without the ending is too broad for the purchasing decision. Compare the full contents and software entitlement of any alternative rather than assuming they match this S kit.
The side-printing decision belongs at the start of the purchase. A different ribbon does not add an automatic card-turning mechanism to the supplied unit. Use Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It? to compare the workflow questions before approving hardware.
The Amazon listing identifies PC-only Smart ID software, a printer driver CD, manuals and guides, a power cord and USB cable. It also lists a 250-print YMCKO ribbon and 100 PVC plastic cards. Those are package descriptions from the seller, not a promise of every accessory a badge desk may need.
The included card quantity is the immediate stock limit for a larger first batch. As a planning example, an office issuing 150 finished badges needs more than the kit’s 100 cards. Order suitable additional cards and leave your chosen allowance for setup prints and corrections instead of planning the whole job around the ribbon’s larger number.
Ask the seller for the supplied ribbon’s exact part number when planning repeat orders. The starter-pack description names its panel type and print count, but a replacement order should identify the exact compatible cartridge. Don’t substitute another IDP ribbon because its product title contains a similar print count.
The listing describes a “long cleaning cord.” That wording does not clearly identify a cleaning card or a complete maintenance kit. Ask the seller what the item is, how many are supplied and which instructions apply. Don’t silently rewrite the description as a verified cleaning-card inclusion.
For future refills, use SMART-31 Supplies: Match 659366 and 659376 to the Job. Keep the replacement-part decision separate from the initial package contents. An itemized starter pack can simplify the first order without establishing every later consumable you will buy.
Treat PC-only Smart ID as a condition of this exact kit. The same listing refers to Windows and Linux in its system description, but that broader wording does not establish that the bundled designer runs on Linux. Printer-driver support and design-application support are different questions.
Ask which Smart ID edition you receive and whether the entitlement is permanent, a trial or a subscription. The checked listing does not establish the license term. Record the answer before comparing the complete purchase with a package that clearly describes a lasting license.
Then ask about the workflow you intend to use. If staff enter one badge at a time, confirm how they add a photograph and correct a name. If your office imports a staff list, ask whether the included edition supports that file and how photographs are matched. Don’t infer database import from the presence of a driver CD.
Check the current requirements for the actual badge computer, including the design application and driver. If another team manages software installations, give them the proposed kit’s details before ordering. They can confirm whether the application can be installed and used under the office’s normal account permissions.
Don’t buy this PC-only package for a Mac on the assumption that another program in the SMART family can run there. Ask for a separately confirmed software arrangement, or compare a package intended for your computer at ID Card Printers for Small Businesses: Compare Printers and Starter Kits. The printer name alone is not a software entitlement.
IDP publishes up to 180 full-color cards per hour for the SMART-31S. That is a maker specification, not a measured rate for our own employee badge jobs. Use it to understand the printer while planning the total session around record preparation and corrections as well.
An operator still needs approved names and usable photos before printing. If the staff list changes on the day of the batch, someone must decide which record is current. Resolve who approves those changes before setting a badge deadline, rather than assuming hardware speed will absorb the extra work.
The Amazon feature text describes more than 180 color cards per hour. Use the maker’s stated up-to rate instead of treating the seller’s higher wording as a separate proven improvement. Don’t calculate a guaranteed completion time from either advertisement.
IDP lists Ethernet as optional on the SMART-31S. The linked kit includes a USB cable, but that inclusion doesn’t establish an installed Ethernet option. If you need a shared network badge station, ask the seller to identify the exact supplied connectivity and confirm the software’s permitted users or installations separately.
Choose stock for the actual unit rather than for the broad phrase “ID card printer.” Ask the seller for the size, material and thickness requirements that apply to the supplied SMART-31S. Match additional cards to those requirements before combining them with the starter pack.
Keep visual identification separate from access control. IDP describes optional encoding for the SMART-31S family, but the linked kit’s contents do not establish an installed encoder. Ask your access-system supplier which card technology and programming arrangement are required if the finished badge must operate a door reader.
A member number or photograph printed on a plain card does not establish an accepted access credential. Confirm the complete credential and encoding setup before ordering hardware for that purpose. For an ordinary visual employee badge, focus on the readable layout and the way staff will carry the card.
Add holders and lanyards if your office needs them. The listing’s supplied items do not identify those accessories. Use How to Choose Your First ID Badge Printer: A Complete Setup Checklist for the full first-station checklist and CR80 Blank Cards: Choose Thickness, Finish and Material That Fit when choosing additional card stock.
Write SMART-31S, single-sided on the purchase request for the linked kit. A short family name can leave purchasing unsure whether S or D was approved. Ask for the complete unit identity if a supplier proposes an alternative package.
Require confirmed automatic duplex if your badge job depends on it. Compare a specifically identified D configuration rather than adding reverse-side expectations to the S kit. Settle the process before arranging supplies for a large batch.
Plan around 100 included blank cards, then add stock for the rest of the job and your allowance for corrections. The advertised 250-print ribbon doesn’t increase the number of blank cards in the box. Keep both quantities visible when approving the order.
Confirm the exact replacement ribbon identity with the supplier. Save its full part number beside the printer record so staff can repeat the purchase later. If the supplied item changes, perform the compatibility check again before treating the old order as approval for the replacement.
Ask for the Smart ID edition and license term rather than counting the words “software included” as a complete entitlement. Confirm the actual computer and import workflow. Keep driver compatibility separate from the bundled application’s support.
Ask for the identity of the listed cleaning item. The phrase “long cleaning cord” needs clarification before anyone uses it. Check which maintenance supplies you receive and follow the printer’s instructions for those supplies instead of guessing from the package title.
The Amazon listing identifies 100 PVC cards and a 250-print YMCKO ribbon. Those are different quantities. If the first batch needs more than 100 cards, add suitable stock before scheduling the work.
Leave an allowance for setup prints and corrected records as well. Ask how the stated ribbon yield applies to your intended layout rather than treating it as a guaranteed number of finished badges. Don’t infer extra cards from the larger ribbon count.
The exact kit describes Smart ID as PC-only. Its broader system wording does not establish a Linux or Mac entitlement for that designer. Confirm current support with the seller and application supplier before buying for either computer.
A compatible printer driver and a compatible design application serve different roles. If you plan to use an existing designer, check its SMART-31S support and license requirements separately. Don’t count a driver CD as confirmation that the whole badge workflow is supported.
Neither is confirmed in the checked package contents. IDP describes optional Ethernet and encoding for the SMART-31S family, which means you need the exact supplied configuration before counting either feature. The included USB cable establishes a listed accessory, not every available connection.
Ask for installed hardware details if your badge desk requires network printing or encoded access credentials. Get the credential requirements from the access-system supplier as well. A complete consumables pack doesn’t establish optional printer hardware.