Fargo DTC4500e ribbons: check 45200 against the current supply list

Check a Fargo DTC4500e ribbon order against the existing part number and current supply list, including the difference between 45200 and 045230.

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.

If your DTC4500e needs a replacement ribbon, start with the number on the supply you already use. The Amazon Fargo 45200 listing identifies a genuine YMCKO color ribbon for the DTC4500e. That is an exact listing to check, but there is an important difference between its description and the current manufacturer supply list.

HID’s DTC4500e consumables sheet, revised August 28, 2026, lists 045230 for full-panel YMCKO printing. It does not list 045200 in that ribbon table. Do not assume the two numbers are interchangeable or that the current sheet’s image count belongs to the linked 45200 item. Ask your supplier to confirm the correct ribbon for your exact unit and region before ordering.

Keep that ribbon decision separate from cards and maintenance supplies. A color ribbon listing does not establish a complete replenishment package. Check what you have left, whether the badges print on both sides and whether your machine has a lamination module. Those details affect the rest of the purchase request.

What the linked ribbon description confirms

The Amazon description was checked on October 1, 2026. It names 45200, YMCKO and DTC4500e compatibility. The item is presented as a Fargo ribbon. Its returned description does not state a ribbon yield, a blank-card quantity or a complete cleaning-kit package.

Use that information to identify the item, not to fill the missing fields. The current maker sheet gives a different number for its full-panel color ribbon. Send both the existing supply number and the proposed listing to your printer supplier if you need to resolve the difference. Neither a familiar photograph nor the printer-family name settles every regional supply requirement.

The 45200 Amazon listing is a buying route once the exact match is confirmed. If the seller offers another ribbon as a replacement, ask for the complete part number and the maker guidance supporting the change. Do not accept a higher image count as proof that a different ribbon is suitable.

Read the current ribbon choices by badge layout

HID’s current consumables sheet identifies 045230 as YMCKO and 045231 as YMCKOK. The sheet describes the latter for full color on the front with black text or barcodes on the back. Decide what belongs on each side before asking for the current regional ribbon number.

The same sheet lists 045233 as half-panel YMCKO for limited personalization, including suitable preprinted cards. That description does not establish a drop-in replacement for a design using color across the whole card. Ask whether the intended layout fits before choosing a half-panel supply.

HID also lists 045201 premium resin black and 045202 standard resin black. These are separate monochrome choices. A badge with a color photograph has a different requirement from a card using only black text. Keep the required colors and reverse-side design visible in the order rather than selecting by yield alone.

These maker-listed numbers help frame the supplier conversation. They are not additional linked purchase recommendations here. The current regional part, installation requirements and exact package should be confirmed before changing from an existing ribbon. The maker’s part-number warning is especially relevant when a seller’s listing uses another number.

Printer sides and lamination are different requirements

HID’s DTC4500e product page identifies single-sided and dual-sided printing configurations, with lamination as an option. Your actual machine determines which features you can use. A supplies order cannot establish that an optional module is installed.

Write down whether the front and back need color, black information or a separate protective layer. Ask the supplier to match the ribbon to that layout and to the installed hardware. An overlay panel named in a ribbon description should not be treated as confirmation of a complete optional lamination setup.

For the wider front-and-back decision, read the single-sided and dual-sided printer guide Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It?. If you are replacing hardware rather than replenishing a working machine, use the DTC4500e configuration guide Fargo DTC4500e Configurations: What the Printer-Only Offer Leaves Out. Keeping those questions separate makes the supply order easier to check.

Blank cards need their own specification

HID’s current consumables sheet specifies CR80 or CR79 cards, 9 to 40 mil, and PVC or polyester stock with a polished PVC finish for the DTC4500e. Keep the exact stock and dimensions in the purchase request. The general format is not a promise that every blank-card pack meets the maker’s requirements.

The sheet gives a separate restriction for the lamination module. HID recommends composite cards for that module, says PVC cards are not recommended for it and excludes adhesive cards from use with it. Confirm your installed configuration before copying a plain-card order from another DTC4500e owner.

If the job includes an access credential, ask the access-system supplier to specify the card technology and any required encoding. The printable surface and the access function need separate confirmation. A ribbon intended for photographs does not establish that your blank stock will work with a door reader.

Use the blank-card buying guide CR80 Blank Cards: Choose Thickness, Finish and Material That Fit to organize the stock questions. For this printer, HID’s model-specific guidance takes precedence over a general badge-card description. Do not assume that a Badgy card pack is approved for the Fargo just because its format looks familiar.

Cleaning supplies belong in the same purchase plan

HID’s printer cleaning page lists 086177 for the DTC4500e, alongside other specified Fargo models. The current DTC4500e sheet describes the kit’s printhead swabs, cleaning cards and alcohol cleaning cards. These are maintenance materials, separate from blank cards used for badges.

HID recommends cleaning at each ribbon change. Follow the full instructions for your machine when planning that work. A ribbon change is a useful point to check whether the required maintenance supplies are actually available, instead of discovering that the cupboard contains only printable stock.

There is no linked cleaning-kit purchase in this guide. The maker’s part number is a compatibility reference, not a claim that a particular seller currently has that kit. If you consider an aftermarket pack, ask the seller what it contains and keep its claimed compatibility separate from a Fargo-manufactured kit.

Buying guide

Confirm the ribbon number before the order

Record the complete existing ribbon number and printer model. Include the unit’s region in the supplier question. The checked listing names 45200 for the DTC4500e, while the current HID sheet names 045230 for its full-panel color option. Ask for a documented match instead of assuming the number difference is only formatting.

Treat an unconfirmed replacement as a pending decision. Ask whether the proposed ribbon needs any software or firmware change and where the manufacturer explains that requirement. This guide does not establish an update procedure or a universal substitution between the two numbers. Get the answer before choosing the seller and pack quantity.

Calculate supplies from the finished layout

Write down what prints on the front and on the back. Use the maker’s ribbon descriptions to ask for the appropriate current part. Do not multiply a stated image yield into a finished-badge total without checking how that layout uses the ribbon. Keep planned corrections and setup cards in your own quantity calculation.

Count blank cards and cleaning material separately from the ribbon. The linked item’s description does not confirm a complete supply bundle. Check the remaining stock before the next printing day and list every missing item in the request. A ribbon order alone should not be treated as proof that the badge desk is ready.

Match the stock to the installed modules

Confirm whether the printer has the optional lamination module. HID’s card-stock guidance changes for that use, so a general accepted-material description is not enough. Ask the supplier to match the proposed cards to the installed printer and the intended finishing process.

Keep regional part numbers and exact package contents in the approval notes. HID warns that numbers may vary by region. If someone else replenishes the supplies later, they should be able to identify the confirmed ribbon and stock without relying on a photograph or a vague description such as Fargo color supplies.

FAQ

Is 45200 definitely the current ribbon for every DTC4500e?

The checked Amazon listing names 45200 and DTC4500e compatibility. HID’s current consumables sheet lists 045230 for full-panel YMCKO printing and warns about regional part numbers. Those sources do not establish a universal answer for every unit.

Give your supplier the existing ribbon number, printer model and region. Ask for the current documented replacement before ordering or changing parts. Do not transfer a yield from the current maker entry to the different number in the Amazon listing.

Can I use the same ribbon for color on both sides?

Specify the exact front-and-back layout before selecting supplies. HID describes its current YMCKOK option for a color front with black information on the back. That is a different requirement from color photographs on both sides.

Ask the supplier how the planned design affects the appropriate ribbon and its useful yield. Automatic card turning does not settle the panel choice. Keep the hardware and ribbon questions together when confirming a two-sided job.

Does this ribbon order include blank cards or a cleaning kit?

The checked description identifies the 45200 ribbon. It does not establish an included card pack or complete cleaning kit. Ask the seller about any package contents that are not explicit rather than counting them as included.

Check your own stock of cards and maintenance supplies before ordering. Use HID’s guidance for the exact machine, and keep each required item visible in the request. A familiar model name on the ribbon does not complete the rest of the replenishment plan.

Can I copy supplies from a DTC1250e owner?

Use the DTC4500e’s own supply requirements. A shared Fargo brand does not establish ribbon interchangeability. The DTC1250e supply guide Fargo DTC1250e Supplies: Ribbons, Cards and Cleaning Kits That Fit belongs to that different model and should not determine your DTC4500e ribbon order.

Some maker cleaning guidance names both printers, but that specific overlap does not extend to every supply. Confirm each part separately. Keep the full model beside every ribbon, card and maintenance item in the order notes.