Should you replace your Evolis Primacy with a Primacy 2?

Decide whether to keep an Evolis Primacy or move to Primacy 2 by required capabilities, replacement ribbon families and the exact bundle contents.

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Learn more.

Keep a working Evolis Primacy if it still prints the badges you need and you can obtain its correct supplies. Consider a Primacy 2 when you need a specific capability your current configuration lacks, or when replacing the existing printer is more practical than repairing it. A newer model name alone is not a reason to replace a usable setup.

The first purchase change to plan is the ribbon. Evolis’s YMCKO compatibility sheet lists separate color-ribbon families for Primacy and Primacy 2. Don’t order a new printer expecting to use your remaining Primacy ribbons in it.

For a current purchase, the Amazon listing for the Primacy 2 single-sided kit names PM2-0001-A and includes a color ribbon, 100 blank cards and Card Imaging card design software. The listing does not establish the software edition or license duration. Check the current price on Amazon and confirm the software terms before ordering.

Compare the decision, not just the generation

An existing owner and a first-time buyer have different starting points. An owner may already have a working design program and approved card stock. A first-time buyer needs a usable package, including a way to design and print the badges. Compare your complete setup with the exact replacement package rather than comparing two printer names.

Buying question If you already own a Primacy If you are considering Primacy 2
Does the current badge job work? Keep the printer in consideration if the output and workflow meet your needs. Identify the requirement that would justify replacement.
Which ribbon should you order? Evolis assigns R5F002XXX and R5F008XXX YMCKO families to Primacy. Evolis assigns R5F202XXXX and R5F208XXXX YMCKO families to Primacy 2.
What software will you use? Check your existing license and its ability to print to the replacement. The linked kit names Card Imaging software without full license details.
Do you need the reverse printed automatically? Identify your installed configuration. The linked PM2-0001-A listing is single-sided.
Are extra features included? List the capabilities you already use. Match optional hardware to the seller’s exact package.

The ribbon rows follow Evolis’s compatibility sheet. The linked kit description follows Amazon. The table is a buying checklist, not a claim that every older Primacy has the same configuration or that every Primacy 2 includes the same options.

What could justify the upgrade?

Evolis’s Primacy 2 page lists published rates of up to 280 single-sided cards per hour and 170 dual-sided cards per hour. Evolis lists a standard 100-card feeder and an optional 200-card feeder. The numbers describe the maker’s printer specification, not the time your office will take to prepare and issue a batch.

Before choosing a faster printer, identify where staff spend time. If the delay is collecting photographs or correcting employee details, replacing the printer will not remove that work. If staff regularly wait for the printer after all records are ready, printer capacity deserves closer attention. Write down the busiest actual job rather than estimating the purchase from your total staff count.

Evolis also offers configuration choices for the Primacy 2, including automatic double-sided printing, an LCD panel, encoders and a lamination module. Choose an option because your job requires it. The family page is not a packing list for the linked single-sided kit, so ask the seller to identify any extra hardware in writing.

A replacement may also be sensible when the old printer needs a repair. Ask for a repair assessment before deciding. Compare the repair proposal with a complete replacement proposal that includes the software and supplies you will need. Don’t count unopened ribbons as transferable stock unless the maker confirms compatibility with the replacement.

The ribbon change needs its own order

Evolis’s YMCKO sheet assigns R5F008XXX with 300 prints to Primacy and R5F208XXXX with 300 prints to Primacy 2. The similar panel name and published yield do not establish interchangeability. Use the full printer model and the ribbon’s complete part number when preparing a purchase request.

The Amazon listing for the R5F208A100 ribbon identifies a one-pack Primacy 2 YMCKO ribbon rated for 300 prints and includes a Bodno software demo card. A demo card does not establish a permanent design-software license. Check the current price on Amazon after confirming the code fits your printer’s region.

The ribbon listing also contains a feature line with 280 single-sided and 170 dual-sided print counts. Those numbers match Evolis’s published printer rates, while the title identifies a 300-print ribbon. Use the maker’s ribbon compatibility sheet for the ribbon rating. Don’t plan a supply order by treating cards per hour as prints per roll.

YMCKO means yellow, magenta, cyan, black and overlay in Evolis’s panel description. The maker’s ribbon rating does not guarantee the same number of finished badges for every front-and-back design. Decide whether the reverse needs color or only black text before asking your supplier to confirm ribbon use for the job.

Buying guide for a Primacy replacement

Check the exact unit before buying supplies

Start with Primacy or Primacy 2 as the full model identity. Read the label on your existing printer rather than copying a shortened name from an invoice. For a replacement, ask for the full printer part number and whether the package prints one side or both sides automatically. Keep that information with your supply-order notes.

For the linked replacement kit, Amazon names PM2-0001-A as single-sided. Don’t use an optional double-sided capability on Evolis’s family page as evidence that the seller includes it. If the reverse is part of every badge, obtain a clearly identified duplex package rather than planning the job around an unspecified future upgrade.

Match the ribbon region as well as the generation

Evolis’s region-code guidance says to match the printer zone and ribbon code. For Primacy 2, the maker identifies the region through the printer part-number suffix. For the older Primacy, Evolis points to the label on the outer box. A generation match and a region match are separate checks.

Evolis also describes checking printer and ribbon information in the Premium Suite interface. If the box is missing or the printer was bought elsewhere, use the maker’s directions to identify the zone before ordering. Keep the full ribbon suffix in the order, since a shortened R5F208 description leaves out information needed to confirm regional fit.

Confirm the software you will actually receive

The current Evolis page describes Primacy 2 configurations with ID-ALL Starter. The linked Amazon kit instead names Card Imaging card design software. The software name in the actual kit controls your purchase question. Ask for its edition, activation terms and supported operating system rather than assuming the maker’s current package description applies to the seller’s stock.

For an existing office, ask whether your current design program supports the replacement printer and whether moving it requires a license change. Template and data transfer need separate confirmation. A seller’s promise that software is included does not establish that you can open your old badge template or use the same employee database without further work.

Count starter supplies separately from feeder capacity

Amazon lists 100 blank cards and a color ribbon in the linked single-sided package. The listing does not identify the included ribbon code or its yield. Ask for those details before planning a large first batch. Keep the card count, ribbon rating and number of finished badges as separate entries on the order.

Evolis lists a 200-card feeder as optional. A larger feeder does not add blank cards to a kit or increase the amount of printing available from its supplied ribbon. If fewer reloads would help your office, confirm that the feeder option is included and order sufficient consumables separately.

What to do with your existing Primacy supplies

Make a short inventory before you approve the replacement. Record the exact codes on unopened ribbons and the maker’s specifications for the cards you already use. Separate supplies that belong to the old printer from supplies that a supplier has explicitly confirmed for the replacement.

Keep old and new ribbon boxes in different labeled places while both printers remain in service. A purchasing assistant should be able to choose the right replacement without knowing the history of the upgrade. Record which printer uses each approved code instead of storing all color ribbons under a general Evolis label.

Card stock also needs a check even if the badge size will stay the same. Ask the supplier to confirm your existing card material and thickness for the exact new configuration. If your office uses access cards, confirm the printing surface and any encoding requirement separately. A printed employee photograph does not establish that a card will work with your door system.

Frequently asked questions

Can I put a Primacy ribbon in a Primacy 2?

Don’t assume you can. Evolis’s YMCKO sheet places the older Primacy and Primacy 2 in separate compatibility columns with different ribbon families. Match the full replacement code to the printer generation before ordering.

Ask the supplier to confirm the region suffix too. A ribbon with the right general family can still be the wrong regional purchase. Keep the supplier’s confirmed code in your purchasing notes so the next order does not repeat the comparison from scratch.

Is Primacy 2 automatically double-sided?

Evolis offers single-sided and double-sided configurations. The linked PM2-0001-A Amazon kit is described as single-sided, so it should be considered for a job that fits that package.

If your badge requires printing on the reverse, decide whether staff will accept a manual process or need automatic duplex. Read the single-sided versus dual-sided guide Single-Sided vs Dual-Sided ID Card Printers: When Is Automatic Duplex Worth It? before choosing the actual configuration.

Will the included software replace my existing program?

The linked kit names Card Imaging card design software but leaves its edition and license terms unclear. Confirm the program’s supported system and the features your office uses before treating it as a replacement.

Ask about opening an existing template and importing your records. If staff currently issue badges from a database, describe that workflow to the seller. Software inclusion alone does not confirm that your office can move its existing setup unchanged.

Should a small office upgrade a working Primacy?

An upgrade needs a defined reason, such as an unavailable required option or a repair decision. If the existing setup meets the badge job and you can obtain compatible supplies, keeping it is a reasonable option.

For a new purchase, compare complete packages instead of model age alone. Read the Primacy 2 buying guide Buying a Primacy 2: Simplex, Duplex and Bundle Entitlements for package questions and the Primacy 2 supply guide Primacy 2 Replenishment: Region-Coded Ribbon, Cards and Cleaning for replacement orders. Choose the printer after the software and supply checks are settled.